Can you also tell me how can I increase power of my Pulsar
Can you also tell me how can I increase power of my Pulsar 150cc? I have 2006 model.
7
Answer(s)
Post an Answer
Answer(s)
Answers submitted by Users
Hi,
Its not possible to increase power of esxisting Pulsar as its a design problem. However you can increase overall performance by maintaining well, using premium petrol with additives. Posted: 4897 day(s) ago |
You can increse the power of any machines by variety of ways:
1. Replace the airfilter with K&N, DYNATONE or some thing of sports category. 2. Replace your silenser with a sports mufler. 3. Tune the engine in a such a way that it is getting max fuel but dont exceed certain limit where the engine flutters. 4. Still you need more then you need to Open your engine... Posted: 4897 day(s) ago |
Go for the K&N filter
Change the sprokets (depending on whether u want more acceleration or more top end) Install a free flow exhaust and tune the carburettor for it. Also u can use iridium soark plugs with a power cable. That should help make the bike more zippy. Posted: 4897 day(s) ago |
![]() B S Kumar |
To increase your bike's power, the engine has to be made to burn more of the fuel/air mixture, or burn it quicker. To burn more, you can rebore the engine to get a marginally higher displacement. To burn it quicker, you will have to do a variety of things, all sophisticated and requiring extensive modifications. Just increasing efficiency with add-on or aftermarket parts will give you marginally better performance, just like setting your air/fuel mixture for performance instead of economy.
Posted: 4896 day(s) ago |
THERE IS SLIGHTLY POWER CAN INCREASE BY OPEN TYPE SILENCER DUE TO FREE FLOW OF AIR .CAN REACH 10KM MORE IN SPEED AT TOP END THROTTEL.
OTHER CHANCE NOTHING TO DO MORE IN 4 STROKE BIKE.... DONT DO ANY TYPE ALTER IN ENGINE ,IT WILL TOO BAD IN PERFORMANCE AFTER A SOME KM RUN.. OR CHANGE TO 200/220 PULSAR WILL BEST Posted: 4896 day(s) ago |
![]() Navin |
hey guys, u can increase BHP by adjusting clutch spring..!!!, in stock condition it will be in 1:2 ration, but u can keep it up tp 1:10 ratio.
Posted: 3063 day(s) ago |
![]() Daniel |
1. Porting Polish head, valve to 36 in & 31 ex (4,5), use denzo iridium & racing coil
2. Use piston NS OS 1.00 (up to 261cc) Use carburator PWK sudco 3.Use free flow exhaust Posted: 2602 day(s) ago |
Recently Asked Questions
-
0Post an Answer
Answer(s) -
WITH LIFE-TIME INSURANCE. CONTACT US TODAY. Phone 00917829142109, WHATSAPP 00917829142109.
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s) -
0Post an Answer
Answer(s)
Find New Cars
By Brand
Get complete details of new cars
By budget
₹ 5 Lakh to ₹ 10 Lakh
Ad
Ad